2024年
[49] Dun Lyu, Yibo Ren, Shuo Liu, Shiji Chen. Command correction in time-frequency domain for decreasing tracking error of trajectory with a drastic curvature change. Precision Engineering, 89:230-238, 2024. https://doi.org/10.1016/j.precisioneng.2024.06.015
[48] Dun Lyu, Jiahui Zhang, Jianhua Wang, Hui Liu, Junkang Guo,R-test-based identification method for geometric errors of rotary axes in a five-axis machine tool with a rotary table and tilting head,Measurement,Volume 225,2024,113932
2023年
[47] Dun Lyu, Xinxin Ye, Huijie Zhang, Hui Liu. Offline fast modification of position loop gains for five-axis machining. The International Journal of Advanced Manufacturing Technology,2023. 10.1007/s00170-023-11756-9
[46] Dun Lyu, Yanhong Song, Han Liu, Hui Liu, Dawei Wang, and Huijie Zhang. Calculation method of cutter location points considering corner transition speed in CNC. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.2023, DOI: 10.1177/09544054231158061
[45] Dun Lyu, Ren Yibo, Chen Shiji, Liu Hui. Solution Method for Time-frequency Responds of Servo Control Systems Based on Frequency Domain Characteristics. 2023, Measurement and Control. DOI 10.1177/00202940231158392
[44] Dun Lyu, Jiahui Zhang, Yinhui Chen, Huijie Zhang and Junkang Guo. Efficient calculation of continuous trajectory spherical center displacements by using non-contact R-test. 2023, Meas. Sci. Technol. 34 015107. DOI 10.1088/1361-6501/ac924c
2022年
[43] Lyu D, Zhao Y, Song Y, Liu H, Wang D. Mechanism Analysis of Time-Dependent Characteristic of Dynamic Errors of Machine Tools. Machines. 2022; 10(2):160. https://doi.org/10.3390/machines10020160
[42] 吕盾,张佳辉,王大伟,成群林,赵万华,卢秉恒.国产数控机床动态精度技术现状与对策[J].航空制造技术,2022,65(6):22-33
[41] Dun Lyu, Yanhong Song, Pei Liu & Wanhua Zhao (2022) Screening and optimization method of defect points of G code in three axis NC machining, International Journal of Computer Integrated Manufacturing, DOI: 10.1080/0951192X.2022.2128211
2021年
[40] D Lyu, Q Liu, S Luo, D Wang, H Liu. The influence of dynamic error outside servo-loop on the trajectory error. The International Journal of Advanced Manufacturing Technology, 2021, 113(5), 1517-1525. DOI:10.1007/s00170-021-06668-5
[39] 吕盾,刘硕,赵艳超,李文庆,赵万华,卢秉恒.具有串联轴伺服进给系统的跟随误差控制策略[J].学报,2021,55(05):34-44.
LV Dun, LIU Shuo, ZHAO Yanchao, LI Wenqing, ZHAO Wanhua, LU Bingheng. Tracking Error Control Strategy for Servo Feed System Connected with Series Axis [J]. Journal of Xi'an Jiaotong University. 2021, 55(05): 34-44.
[38] 吕盾,罗世有,王大伟,汤洪涛,赵万华,卢秉恒. 考虑几何误差和跟随误差的五轴联动轨迹误差预测方法. 学报, 2021,55(10):1-12.
LYU Dun, LUO Shiyou, WANG Dawei, TANG Hongtao, ZHAO Wanhua, LU Bingheng. A Trajectory Error Prediction Method Considering Geometric Errors and Tracking Errors for Five-Axis Machine Tools. Journal of Xi’an Jiaotong University, 2021,55(10):1-12.
[37] 吕盾,宋彦宏,刘艺柱,王大伟,赵万华.速度、加速度及加加速度对S形缘条加工时间的影响[J/OL].航空制造技术:1-9
LÜ Dun, SONG Yanhong, LIU Yizhu, WANG Dawei, ZHAO Wanhua. Influence of Feed Velocity, Acceleration and Acceleration Establishment Time on Processing Time of S–Shaped Fillet. Aeronautical Manufacturing Technology. 2021, 1-9
2020年
[36] Liu, Qing; Lyu, Dun; Zhao, Wanhua. Section method of CNC machine tools based on big data cloud database. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, Pages 391-394, 2020
2019年
[35] Dun Lyu, Qing Liu, Hui Liu, Wanhua Zhao. Dynamic error of CNC machine tools: A state-of-the-art review. The International Journal of Advanced Manufacturing Technology,2020, 106(5), 1869-1891. DOI: 10.1007/s00170-019-04732-9
[34] 吕盾, 刘青, 刘沛, 汤洪涛, 赵万华, 卢秉恒. 五轴机床加工零件轮廓误差预测方法. 学报. 2020, 54(2):9-15.
[33] 吕盾,张天宇,郑贝贝,赛云祥,赵万华.长传动链摆头主轴高加速度启停控制策略研究[J].机械工程学报,2019,55(23):210-215.
[32] Xiao Yang, Rudolf Seethaler, Chengpeng Zhan, Dun Lu, Wanhua Zhao. A Model Predictive Contouring Error Pre-Compensation Method[J]. IEEE Transactions on Industrial Electronics, 2019: 1-1. (SCI)
[31] Xiao Yang, Rudolf Seethaler, Chengpeng Zhan, Dun Lu, Wanhua Zhao. A Novel Contouring Error Estimation Method for Contouring Control[J]. IEEE-ASME Transactions on Mechatronics, 2019, 24(4): 1902-1907.
[30] Zhang, H., Liu, H., Du, C., lv, D., Zhang, J., & Zhao, W. (2019). Dynamics analysis of a slender ball-screw feed system considering the changes of the worktable position. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(8), 2685–2695. https://doi.org/10.1177/0954406218799781
2018年
[29] Dun Lu, Sanli Liu, Xuewei Li, Diaodiao Wu, Wanhua Zhao, Bingheng Lu. Optimal cutting directions by considering the dynamic mismatch between feed axes of machine tools. The International Journal of Advanced Manufacturing Technology 2018, 95, 1607-1615.
[28] 吕盾, 李润泽, 刘辉, 赵万华, 卢秉恒. 数控机床高速高加速进给下的跟随误差控制策略. 学报, 52(12), 25-31, 2018.12.
[27] Cunfan Zou, Huijie Zhang, Dun Lu, Jun Zhang and Wanhua Zhao. Effect of the screw-nut joint stiffness on the position-dependent dynamics of a vertical ball screw feed system without counterweight. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2018, 232(15): 2599-2609.
[26] Chao Du, Jun Zhang, Dun Lu, Huijie Zhang, wanhua Zhao. A parametric modeling method for the pose-dependent dynamics of bi-rotary milling head. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture. 2018, 232(5):797-815.
2017年
[25] Dun Lu, Wanhua Zhao, Bingheng Lu. Tool Path Generation for Turbine Blades Machining with Twin-tool. Journal of Manufacturing Science and Engineering–Transactions of the ASME. 2017, 139(11), 111015.
[24] Xiaojun Yang, Dun Lu, Chengfang Ma, Jun Zhang, Wanhua Zhao. Analysis on the multi-dimensional spectrum of the thrust force for the linear motor feed drive system in machine tools. Mechanical Systems and Signal Processing . 2017, 82: 68-79.
2016年
[23] Dun Lu, Wanhua Zhao, Bingheng Lu. Thermal Characteristics of Water-lubricated Ceramic Hydrostatic hydrodynamic Hybrid Bearings. Tribology Letters. 63(2): 23, 2016.8
[22] Tao Liang, Dun Lu, Xiaojun Yang, Jun Zhang, Xiaobo Ma, Wanhua Zhao. Feed fluctuation of ball screw feed systems and its effects on part surface quality. International Journal of Machine Tools and Manufacture. 2016,101: 1-9.
[21] Hui Liu, Dun Lu, Jun Zhang, Wanhua Zhao. Receptance coupling of multi-subsystem connected via a wedge mechanism with application in the position-dependent dynamics of ballscrew drives. Journal of Sound and Vibration. 2016, 376: 166-181.
[20] Xiao Yang, Dun Lu, Jun Zhang, Wanhua Zhao. Analysis on steady-state vibration induced by backlash in machine tool rotary table. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. 2016, 231(22): 4163-4171 doi: 10.1177/0954406216662086.
[19] Jun Zha, Dun Lv, Qian Jia, Yaolong Chen. Motion straightness of hydrostatic guideways considering the ratio of pad center spacing to guide rail profile error wavelength. Int J Adv Manuf Technol (2016) 82:2065–2073 DOI 10.1007/s00170-015-7515-2
[18] Xiaojun Yang, Yan Li, Chengfang Ma, Dun Lu, Jun Zhang, Wanhua Zhao. A Novel Evaluation Method on the Precision of Linear Motor Feed System in High-speed Machine Tools [J]. Materials Science Forum. 2016, 836-837:220-227.
[17] Xiaojun Yang, Chengfang Ma, Yan Li, Dun Lu, Jun Zhang, Wanhua Zhao. The Analysis and Optimization of Machining Precision Based on Electromechanical Matching in High-speed Machine Tools [J]. Materials Science Forum. 2016, 836-837:584-59. DOI: https://doi.org/10.1177/0954405416654599
[16] Chao Du, Dun Lu, Jun Zhang, wanhua Zhao. Pose-Dependent Dynamic Modeling and Analysis of Bi-Rotary Milling Head. ASME 2016, International Manufacturing Science and Engineering Conference. 2016
2015年
[15] Dun Lu, Wanhua Zhao, Bingheng Lu. The maximum dynamic eccentricity ratio of hydrodynamic rolling hybrid bearings. Proceedings of the Institution of Mechanical Engineers, Part J: J. Engineering Tribology. 2015, 229(2): 168-177.
[14] Xiaojun Yang, Dun Lu, Jun Zhang, Wanhua Zhao. Dynamic electromechanical coupling resulting from the air-gap fluctuation of the linear motor in machine tools. International Journal of Machine Tool & Manufacture. 2015, 94: 100-108.
[13] Xiaojun. Yang, Dun Lu, Jun Zhang, Wanhua Zhao. Investigation on the Displacement Fluctuation of the Linear Motor Feed System Considering the Linear Encoder Vibration. International Journal of Machine Tool & Manufacture. 2015, 98: 33-40.
[12] Junxun Ma, Dun Lu, Wanhua Zhao. Assembly errors analysis of linear axis of CNC machine tool considering component deformation. International Journal of Advanced Manufacturing Technology. 2015, 12: 1-9.
[11] Xiao Yang, Dun Lu, Sanli Liu, Jun Zhang, Wanhua Zhao. Modeling and analysis of steady-state vibration induced by backlash in servo rotary table. Front. Mech. Eng. 2015, 10(1): 43–47. DOI 10.1007/s11465-015-0327-0
[10] 马成方，杨晓君，张俊，吕盾，赵万华. 面向运动平稳性的直线电机推力的频谱特征分析[J]. 学报，2015,49(8):45-51 (EI: 20153801299347).
[9] 位文明,吕盾,张俊,赵万华.变姿态下摆台多支承轴系轴承刚度的计算方法[J].华中科技大学学报(自然科学版),2015,43(10):21-25.
2014年
[8] Dun Lu, Wanhua Zhao, Bingheng Lu. The Maximum Allowable Misalignment in Hydrodynamic Rolling Hybrid Bearings. Journal of Engineering for Gas Turbines and Power –Transactions of the ASME. 2014, 136(8): 082501 1-6.
[7] Dun Lu, Wanhua Zhao, Bingheng Lu. Effects of Rolling Bearing Type and Size on the Maximum Eccentricity Ratio of Hydrodynamic Rolling Hybrid Bearings. Tribology Transactions. 2014, 57(2): 225-229.
[6] 位文明、吕盾、张俊、赵万华. 三排圆柱滚子转台轴承静刚度的影响因素分析[J]. 学报，2014,12.
[5] Wenming Wei, J Zhang, D Lu, W Zhao. Effect of tilting angle on the dynamics of tilting table driven by worm and worm wheel. Journal of Mechanical Engineering Science. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2014, 229(10): 1782-1791.
2013年
[4] Dun Lu, Wanhua Zhao, Bingheng Lu. Cage speed of hydrodynamic rolling hybrid bearings. Tribology Letters, 2013, 51(3): 303-309 .
2012年
[3] Dun Lu, Wanhua Zhao, Bingheng Lu. Static characteristics of a new hydrodynamic rolling hybrid bearing. Tribology International, 2012, 48(4): 87-92..
[2] Dun Lu, Bingheng Lu, Jun Zhang. Effects of Parallel Misalignment on Performance of Hydrodynamic Rolling Hybrid Bearing. Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, (IMECE2012), November 9-15, 2012, Houston, Texas, USA.
2011年
[1] Dun Lu, Wanhua Zhao, Bingheng Lu. A Zero Wear Assembly of a Hydrodynamic Bearing and a Rolling Bearing. Proceedings 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM 2011), 25-27 May 2011, Tampere, Finland.
