学术论文

2024年

 

 

 

220. Li J,  et al. A review of the tribological properties of PTFE and PTFE composites over a wide temperature range. Coatings , 2024.

219. Shang X, Jia Q,  et al. Finite Element Simulation of Mechanical Seal Deformation and its Influence on Lubrication Performance. Industrial Lubrication and Tribology, 2024.

218. 尚雪梅，门静，贾谦，等.  机械密封的变形仿真及其对润滑性能的影响研究，航空学报, 2024.

218. He W, et al. Structurally relaxed Ni55Ti45 ultrathin amorphous film showing superior nano-tribological performance . Journal of Thermal Spray Technology, 2024.

217. Wu L, Lin N, et al. Preparation and performance of various element doped diamond like carbon film on differernt substrates: a mini review . Surface Review and Letters, 2024. 

216. H Feng, S Yuan , N Lin, et al. Progress in tribological performance regulation of friction pairs in piston pumps: structural improvement, material selection, and surface treatment. Materials Today Communications, 2024.

215. Gao Q, Dong J, et al. AC/DC Dual-mode Droplet-Based Electricity Generator by Sequential Contact-Electrification and Electrostatic Induction. Applied Energy, 2024.

214. Zhang Y, et al. Reducing Ambient Noise Diffusion Model for Underwater Acoustic Target. IEEE Transactions on Neural Networks and Learning Systems, 2024.

213. L Wu , N Lin, S Yuan, et al. Numerical simulation of the hydrodynamic lubrication performance on bionic shell surface shape of multiscale composite textured surfaces with different depths. Engineering Failure Analysis, 2024.

212. Lin N,  et al. Manipulation corrosion resistance of superhydrophobicity of laser textured AISI 316 stainless steel decorated with hexadecyltrimethoxysilane. Surface Review and Letters, 2024.

211. He W, et al. Evolution of wetted and corroded areas on 8Cr4Mo4V bearing steel exposed to salt water contaminated lubricant oil . Corrosion Science, 2024.

210. Hao J, Wang J,  etal. Study on Corrosion Behavior and First-Principle Analysis of M50 Steel in Lubricating Oil Contaminated by Salt Water. Journal of the Indian Chemical Society, 2024.

209. Su S, Jia Q, et al. Influence of Ag doping on wide-temperature tribological properties of γ-Fe2O3@SiO2 nanocomposite coatings on steel. Metals , 2024.

208. Lin N,  et al. Comparative study of corrosion behavior of 316 stainless steel and Ti6Al4V alloy in simulated seawater. Surface Review and Letters, 2024.

207. Lin N, Duan B, Han F, et al. Wear performance of CoCrFeMnNi and CoCrFeMnNi-SiC coatings on 0Cr18Ni9Ti stainless steel fabricated by plasma transfer arc cladding. Tribology International, 2024.

206. Cao J, et al.  Influence of CePO4 on high temperature anti-friction and anti-wear behaviors of nickel-based h-BN composite coatings. Diamonds and Material, 2024.

205. Cai S, et al.  Thermal stability and high temperature super low friction of γ-Fe2O3@SiO2 nanocomposites.  Lubricants, 2024.

204. Deng Z, et al. Advances in Magnetic Fluid Seal and Structures. Journal of Magnetism and Magnetic Materials, 2024.

203. Li H, Fan M, Pang Z, et al. Recent Progressof High Temperature Grease: A review. Friction, 2024.

202. Hao Y, N Lin, Liu X, et al. Research progress of high performance coatings prepared by tungsten inert gas (TIG) cladding on typical metallic materials: A Mini Review. Surface Review and Letters, 2024.

201. Wang H, Lin N, Yuan S, et al. Structural improvement, material selection and surface treatment for improved tribological performance of friction pairs in axial piston pumps: A review. Tribology International, 2024.

200. Yan C,  Zhang  Y, Zhu X, et al. Comparative Investigation on the Tribocorrosion Resistance of Ti6Al4V and 60NiTi Alloys in Simulated Seawater Environment. Wear, 2024.

199. 付光远，林乃明，李小凯，等. TC4合金表面莘钽层的制备及力学性能. 太原理工大学学报, 2024.

198. He W, Wang J, Zhuang J, et al. Spontaneous process of dispersed salt water droplets in lubricant oil establishing wetted areas: settling, spreading, coalescing and de-wetting. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024.

197. 成跃，燕超，仝哲，等．采煤机滑靴材料表面改性技术研究现状与展望. 热加工工艺，2024

196. 燕超，仝哲，成跃，等．25Cr3Mo低合金钢在模拟矿井水环境下的腐蚀磨损行为. 热加工工艺，2024．

195. Gao Q, et al. A New Star in Energy Utilization: Solid-Liquid Triboelectric Nanogenerator. NANO, 2024.

194. 刘凯，等．电磁斥力机构研究进展. 工业A，2024．

193. Zheng  C, et al. Study of the corrosion behaviors of M50 steel in brine-contaminated lubricating oil，International Journal of Electrochemical Science , 2024.

192. Wang  J, et al. High temperature deterioration of aviation lubricating oil contaminated by salt water accelerates corrosion of M50 steel. Engineering Failure Analysis , 2024.

191. Sun S et al.  Study the high temperature anti-wear behaviors of thermal oxidation treated Ti6Al4V alloy. Coatings, 2024.

 

2023年

 

190. Pang Z, Ning Z, He W, et al. Effect of phase composition on high-temperature antifriction and anti-wearbehaviors of 60NiTi alloy. Intermetalics, 2023.

189. Liang Y, Ning Z, et al. Low Friction Behaviors of Self-assembled GO/CMWCNTs composite films on high-speed steel. Applied Surface Science, 2023.

188. Lei X, S Yuan , N Lin, et al. Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy. Surface & Coatings Technology, 2023.

187. Wu L , Lin N, Yan K, et al. Numerical simulation on the high speed and heavy load wear behaviors of CoCrNi and CoCrFeMnNi alloys. Tribology International, 2023.

186. Li X, Lin N, Jia H, et al. Cathodic plasma electrolytic deposition (cped) technique for surface strengthening of titanium and titanium alloys: a mini review. Surface Review and Letters , 2023.

185. 孙兴汉，李纪虎，张伟，等. 碳化硅化学机械抛光中材料去除非均匀性研究进展. 人工晶体学报, 2023.

184. 李小凯，严凯，林乃明，等.  火箭撬滑块高速重载磨损行为的研究进展， 航空科学技术, 2023.

183. 邓作炜，张俊锋，贾谦，等. 磁流体密封原理及技术研究进展， 润滑与密封, 2023.

182. Zhang W, et al. A systematic review of the recent advances in superlubricity research. Coatings, 2023.

181. W Qi, et al.  High temperature superlubricity achieved with AlSiN coatings against WS2 coatings，Ceramics International, 2023.

180. 周建星，张荣华，崔权维，等. 工业机器人用RV减速器的齿廓动态磨损特性. 华南理工大学学报（自然科学版）, 2023.

179. Y Zhao, G Zhang, J Wang, et al. Tribological properties of low-temperature time-dependent pretreated graphite for mechanical seal pairs in high-speed turbopump. Friction, 2023.

178. Wang H, N Lin, et al. Improvement in surface performance of stainless steel by nitrogen/carbon-based coatings prepared via physical vapor deposition for marine environment application. Journal of Materials Research and Technology, 2023.

177. 融合思维导图的机械设计基础教学探索， 中国教工, 2023.

176. Ning Z, Pang Z, Wang Z, et al. Self-assembled Multilayer WS2/GO Films on Amorphous Silicon Coating for Enhancing the Lubricating Properties. Applied Surface Science, 2023.

175. 王杰，陈伟敬，林乃明，等. 表面织构-活性屏离子氮化复合处理对38CrMoAl钢摩擦学行为的影响. 太原理工大学学报, 2023.

174. 王强，李纪虎，刘凯，等．真空绝热低温管道真空度测试试验台设计. 真空科学与技术学报，2023．

173 Zhang Y, et al. MSLEFC: A low-frequency focused underwater acoustic signal classification and analysis system. Engineering Applications of Artificial Intelligence, 2023.

172. 田一伟，何万军，林乃明，等. 织构化钛合金减阻及耐腐蚀性能分析. 航空制造技术, 2023.

171. 吴宇浩，秦立果，郑腾飞，等. 无氟超疏水织物及其防污防冰和耐久性研究. 第五届全国结冰与防除冰学术会议论文, 2023.

170. J Cao，et al. High temperature superlubricity performance of h-BN coating on the textured Inconel X750 alloy， Lubricants, 2023.

169. 梁艳，等. 核主泵用机械密封的摩擦学性能研究进展， 液压传动与密封, 2023.

168. J Wang, et al. Study on Corrosion and Wear Behavior of TiZrVCrAl Coating by Vacuum Magnetron Sputtering in Seawater Contaminated Lubricating Oil，JVST A: Journal of Vacuum Science and Technology, 2023.

167. 李易阳，薛英辉，邓作炜，等. 原油含水量测量研究进展， 工程技术, 2023.

166. K Liu, et al. Experiments and data processing of vacuum measurement of LNG vacuum pipeline based on the principle of temperature field，Review of Scientific Instruments, 2023.

165. S Sun, et al. Recent advances in chemical mechanical polishing technologies of silicon carbide，Journal of Modern Fine Chemical Engineering, 2023.

164. 基于“双一流”建设的工程摩擦学全英文教学实践与探索， 新教育时代, 2023.

163. L Zhu，et al. Improving the antifriction behaviors of steel by hybrid treatments of MoS2 and surface texture，Journal of Modern Mechanical Engineering and Technology, 2023.

162. 工程摩擦学课程思政教学的探索与创新， 高教学刊, 2023.

 

2022年

 

161. J Zhu, et al. Analysis of adhesion at interface of the steamed bread and eggshell. Molecules, 2022.

160. Z Ning, J Zhu, Z Wang, et al. A Comparative Study on the Anti-Friction Performance of Amorphous Silicon Films Enhanced by WS2 Nanoflakes. Silicon, 2022.

159. 林乃明，王杰，王强, 等. 轴向柱塞泵柱塞副的摩擦学特性及其表面织构化研究进展. 太原理工大学学报 , 2022.

158. W He, J Zhuang,X Wen, et al. Droplet size dependent localized corrosion evolution of M50 bearing steel in salt water contaminated lubricant oil. Corrosion Science, 2022.

157. G Li, Q Liu, et al. Measurement system of ultra-low moisture content in oil based on microwave transmission method. Microwave and Optical Technology Letters, 2022.

156. 曹虎银，姜浩，王强，等．基于温度场原理的低温真空度测量方法研究. 真空科学与技术学报，2022．

155. 严凯，林乃明，等. 沟槽表面织构火箭橇滑块摩擦学特性的有限元模拟. 中国表面工程, 2022.

154. 王强，郑晨杰，刘凯，等．管道真空测量技术研究进展. 科学与生活，2022．

153. 王强，刘凯，等．家用燃气探测器及智慧燃气探究. 工程技术，2022．

152. 王强, 王焕焕，林乃明，等. 轴向柱塞泵滑靴副服役损伤与防护的研究进展. 机械工程材料 , 2022.

151. 王强, 王焕焕，林乃明，等. 轴向柱塞泵柱塞副摩擦性特性及其表面织构化研究进展. 摩擦学学报 , 2022.

150. 贾吉帅, 周建星*，魏征，等. 摆线齿轮接触状态有限元分析研究. 机床与液压, 2022.

149. 贾吉帅, 周建星*，魏征，等. 精密齿轮传动RV减速器研究现状. 机床与液压 , 2022.

148. Z Wang, W He, C Zheng, et al. Improved tribocorrosion properties of Ti6al4v alloy by anodic plasma electrolytic oxidation. Advanced Engineering Materials, 2022.

147. J Zhu, B Zhang, N Lin, et al. Improving the Lubrication of WSNb Nanocomposite Coatings by The In-situ Oxygen Shielding Effect at Elevated Temperatures: A Combined Study with DFT Simulations. Part J: Journal of Engineering Tribology, 2022.

146.  姜泓成, 等. 高性能润滑脂数字化设计平台. 软件著作权：2022R11L1021659，2022.

145.  王强，刘凯, 等. 真空设备的温度及真空度监控手机APP. 软件著作权：2022R11L2232540，2022.

144. C Yan, K Khanlari, X Zhu, et al. Characterization of microstructure, grain distribution, and surface properties of NiTi-based superelastic alloy. Journal of Materials Science, 2022.

143. Cao, et al. High temperature low friction behavior of h-BN coatings against ZrO2. Coatings, 2022.

142. N Lin, et al. Application of Taguchi method design to investigate tribological performance of laser surface textured 316L austenitic stainless steel. Journal of Materials Engineering and Performance, 2022.

141. 严凯，王焕焕，林乃明，等. 摩擦副高速重载磨损行为的数值模拟. 摩擦学学报, 2022.

140. 林乃明，雷欣，王焕焕，等. 表面织构-等离子表面渗铬复合处理对TA2纯钛耐磨性的影响. 航空制造技术, 2022.

139.  李, 等. 淬火油中微量水分检测研究. 广东技术师范学报，2022.

138. L Zhu, J Dong, X Wang, et al. Study of two green phosphonium-based ionic liquids lubricants for steel/steel contact. Lubrication Science, 2022.

137. H Jiang, Q Liu, G Li, et al. A method for measuring interlayer vacuum degree of the LNG (Liquified Natural Gas) vacuum multi-layer insulation pipe by temperatures. Instruments and Exptrimental Techniques, 2022.

136. L Qin, C Gong, M Hafzi, et al. Carboxylic multi‐walled carbon nanotubes as reinforcing fillers in ionic polymer‐metal composite actuators with enhanced driving performance. Advanced Engineering Materials, 2022.

135. H Jiang, Q Liu, G Li, Z Ning, et al. Design of a high-temperature grease by BP neural network and its preparation and high-temperature performance studies. Industrial Lubrication and Tribology, 2022.

134. Q Liu, et al. A horn antenna with circular aperture for pipeline water cut measurement. Microwave and Optical Technology Letters, 2022.

 

2021年

 

133. 贾吉帅, 周建星*, 等. RV减速器柔性因素对动态传动误差影响分析. 液压与传动 , 2021.

132.  刘锜, 等. 油水混合物含水率测量系统. 软件著作权： 2021R11L2250148，2021.

131. L Qin*, G Dong*, Qunfeng Zeng, et al. Drag reduction and antifouling properties of non-smooth surfaces modified with ZIF-67. Surface and Coatings Technology, 2021.

130. S Yuan, N Lin*, Qunfeng Zeng,et al. Recent advances in gum metal: Synthesis, performcance and application. Critical Review in Solid and Materials Sciences, 2021.

129. S Yuan, N Lin*, Qunfeng Zeng*, et al. Correlation between surface textural parameter and tribological behaviour of four metal materials with laser surface texturing (LST). Applied Surface Science, 2021.

128. J Dong, Q Song*, Qunfeng Zeng, et al. A high voltage direct current droplet-based electricity generator inspired by thunderbolts. Nano Energy, 2021.

127. F Han, N Lin*, Qunfeng Zeng, et al. Research Status of Surface Modification of Titanium-Based Alloys by Pack Cementation. Surface Review and Letters, 2021.

126. Y Zhao, G Zhang*, Qunfeng Zeng, et al. Study on the Friction and Wear Performance of Lightly Loaded Reciprocating Carbon/Aramid-Based Composites. Advances in Materials Science and Engineering, 2021.

125. L Zhu*, J Dong, Qunfeng Zeng, et al. A comprehensive study of amino acids based ionic liquids as green lubricants for various contacts. Tribology International, 2021.

124. J He, Qunfeng Zeng*, et al. Loading rate and holding load dependent room temperature nanoindentation creep behavior of 60NiTi alloy: individual and coupling effects. Journal of Materials Science & Technology, 2021.

123. R Liu, N Lin*, Qunfeng Zeng,et al. Application of ultrasonic nanocrystal surface modification technique for surface strengthening of titanium and titanium alloys: A min Review. Journal of Materials Research and Technology, 2021.

122. F Zhang, Qunfeng Zeng*, et al. Insights on formation mechanism of ultra-low friction of phenolic resin graphite at high temperature. Coatings, 2021.

121. L Zhu, J Dong, Qunfeng Zeng*, et al. High temperature solid/liquid lubrication behaviors of DLC films. Lubrication Science, 2021.

120. Qunfeng Zeng*,et al. The lubrication and viscosity temperature behaviors of castor oil under high temperature. Green Materials, 2021.

119. Qunfeng Zeng*, Z Ning. High temperature tribological properties of diamond like carbon films: a review. Reviews on Advanced Materials Science, 2021.

 

2020年

 

118. L Zhu, J Dong*, Qunfeng Zeng*, et al . Nitrogen-doped carbon nanotubes encapsulated Bi nanobuds for lithium based high-performance energy storage devices. Journal of Alloys and Compounds, 2020.

117. C Yan, Qunfeng Zeng*, et al. Enhanced surface hardness and tribocorrosion performance of 60NiTi by boron ion implantation and post-annealing. Tribology International, 2020.

116. S Wang, J Zhao*, Y Gu* , Qunfeng Zeng, et al. Experimental and numerical investigation into the corrosion performance of X100 pipeline steel under different flow rate in CO2-saturated produced water. Journal of Solid State Electrochemistry, 2020.

115. J Zhu, Qunfeng Zeng*, et al. Elevated-temperature super-lubrication performance analysis of dispersion-strengthened WSN coatings: Experimental research and first-principles calculation. Surface and Coatings Technology, 2020.

114. J He, Qunfeng Zeng*, et al. Enhanced micro/nano-tribological performance in partially crystallized 60NiTi film. Friction, 2020.

113. C Yan, Qunfeng Zeng*, et al. First-principles investigation on the adsorption and dissociation of O2 and H2O molecules on the Ni-rich TiNi alloy surface. Applied Surface Science, 2020.

112. S Yuan, N Lin*, Qunfeng Zeng,et al. Research status of dry friciton behavior of metallic materials: a brief review. Surface Review and Letters, 2020.

111. Qunfeng Zeng*, Y Xu.A comparative study on the tribocorrosion behaviors of AlFeCrNiMo high entropy alloy coatings and 304 stainless steel. Materials Today Communications, 2020.

110. Qunfeng Zeng*, W Qi. Simulation Analysis of Erosion-corrosion Behaviors of Elbow under Gas-solid Two-phase Flow Conditions. Lubricants, 2020.

109. Qunfeng Zeng*, et al. An investigation on the possibility to improve the corrosion and cavitation resistance of SS304 steel by NiTi coatings. International Journal of Modern Physics B, 2020.

108. Qunfeng Zeng. High temperature superlubricity behaviors of γ-Fe2O3@SiO2 nanocomposite coatings. Composite Materials Manufacturing, Properties and Applications, Chapter 22, 2020.
107. Qunfeng Zeng. Superlubricity of NiTi alloys. Superlubricity, Chapter 28, 2020.
106. N Lin*, Qunfeng Zeng,et al. Tailoring Tribological Performance of Pure Titanium by A Duplex Treatment of Laser Surface Texturing (LST)-Thermal Oxidation. Journal of Materials Engineering and Performance, 2020.
105. S Yuan, N Lin*, Qunfeng Zeng,et al. Recent developments in research of double glow plasma surface alloying technology: a brief review. Journal of Materials Research and Technology, 2020.
104. S Yuan, N Lin*, Qunfeng Zeng,et al. In-situ fabrication of gradient titanium oxide ceramic coating on laser surface textured Ti6Al4V alloy with improved mechanical property and wear performance. Vacuum, 2020.
103. S Yuan, N Lin*, Qunfeng Zeng,et al. Manipulation tribological behavior of Ti6Al4V alloy via a duplex treatment of double glow plasma surface molybdenizing-laser surface texturing (LST). Journal of Materials Research and Technology, 2020. 
102. J Zhu, Qunfeng Zeng*, et al. Nano-crystallization Driven High Temperature Self-Lubricating Properties of Magnetron Sputtered WS2 Coatings. Tribology Letters, 2020.
101. L Zhang, N Lin*, Qunfeng Zeng, et al. Super-hydrophobicity and corrosion resistance of laser surface textured AISI 304 stainless steel decorated with Hexadecyltrimethoxysilane (HDTMS). Optics and Laser Technology, 2020.
100. R Peng*, Qunfeng Zeng, et al. Tribological performance of freeze-drying nano-copper particle as additive of PAO oil. Materials Research Express, 2020.

99.  F Chadami, A Aghdam*, S Chadami, Qunfeng Zeng.  Effect of vacuum heat treatment on the oxidation       kinetics of freestanding nanostructured NiCoCrAlY coatings deposited by high-velocity oxy-fuel     spraying.  Journal of Vacuum Science & Technology A, 38(1):022601, 2020.

 

  2019年

98.  曾群锋．类金刚石膜的超低摩擦学行为. 哈尔滨工业大学出版社，2019． 

97.  郝友菖，曾群锋*，等．X80 钢表面聚苯硫醚/二氧化硅耐蚀超双疏涂层制备研究. 山东化工，2019．

96. J Zhu, Qunfeng Zeng*, et al. WS2 Nanopowders as High Temperature Lubricants: an Experimental and Theoretical Study. ACS Applied Nano Materials, 2019.

95. C Yan, Qunfeng Zeng*, et al. Microstructure, phase and tribocorrosion behavior of 60NiTi alloy. Applied Surface Science, 498(1): 143838, 2019.

94. J Zhu, Qunfeng Zeng*, T Fu.  An updated review on TiNi alloy for biomedical applications.  Corrosion Reviews, 2019.

93. Qunfeng Zeng*, Qin L. High temperature anti-friction behaviors of a-Si: H films and counterface material selection. Coatings, 9(7): 450-460, 2019.

92.  Lin N*, Zhang L, Zou J, Qunfeng Zeng, et al. A combined surface treatment of surface texturing-double glow plasma surface titanizing on AISI 316 stainless steel to combat surface damage: Comparative appraisals of corrosion resistance and wear resistance. Applied Surface Science, 2019.

91. Qunfeng Zeng*, Y Gu.  Study on corrosion and cavitation behaviors of NiTi alloy coated on steel. Meeting Abstracts, The Electrochemical Society, 1004-1004, 2019.

90. 曾群锋*，许雅婷，林乃明．304不锈钢在人工海水环境中的腐蚀磨损行为研究. 表面技术，2019．

89. 曾群锋*，曹江南．气体箔片轴承固体润滑涂层的研究进展. 真空科学与技术学报，2019．

88.  燕超，曾群锋*，杨华斌．新型超弹性轴承材料TiNi60合金研究进展. 中国有色金属学报，2019．

87.  C Yan, Qunfeng Zeng*, J Zhou. Ag-doping behavior on (8, 0) single-walled carbon nanotube with single C-vacancy or pyridine-like N 3 defect: a DFT study. Carbon Letters, 2019.
86.  Qunfeng Zeng*, et al. Transformation-induced high temperature low friction behaviors of ZrO2-steel system at temperatures up to 900oC. Materials Research Express, 2019.
85.  Qunfeng Zeng*. A comparative study on the mechanical behaviors of surface strengthened Nitinol 60 alloy and steel. Transactions of the Canadian Society for Mechanical Engineering, 2019.
84.   Yu Wang, Wanjun He, Qunfeng Zeng*, Jianing Zhu. Effects of multiple post weld heat treatments on microstructure and precipitate of fine grained heat affected zone of P91 weld. Steel research international, 2019. 
83. C Yan, Qunfeng Zeng*, et al. Friction-induced Hardening Behaviors and Tribological Properties of 60NiTi Alloy Lubricated by Lithium Grease Containing Nano-BN and MoS2. Tribology Transactions, 1-31, 2019.
82. Qunfeng Zeng*, Shuangli Cai. Low friction behaviors of Ag-doped γ-Fe2O3@SiO2 nanocomposite coatings over a wide temperature range. Journal of Sol-Gel Science and Technology, 90(2): 271-280, 2019.
81. Qunfeng Zeng*. Superlow friction and diffusion behaviors of a steel-related system in the presence of nano lubricant additive in PFPE oil. Journal of Adhesion Science and Technology, 1-18, 2019.
80. C Yan, Qunfeng Zeng*, et al. Influence of Zr-S co-doping on the electronic structure and optical properties of anatase TiO2: First-principles GGA+U method. Applied Physics A-Materials Science & Processing, 125(2), 121-1-9, 2019.

79. J Zhao, Y Gu*, Qunfeng Zeng*, et al.  A comparative study on the corrosion behaviors of X100 steel in simulated oilfield brines under the static and dynamic conditions. Journal of Petroleum Science and Engineering, 173: 1109-1120,2019.

 

2018年

 78. H Sun*,C Wu, Qunfeng Zeng, et al.  Identification of multiple faults in gearbox based on multipoint optional minimum entropy deconvolution adjusted and permutation entropy. Entropy, 20(11), 850, 2018. 

77. Ma D*, Tan W, Qunfeng Zeng, et al. Application and improvement of swarm intelligence optimization algorithm in gas emission source identification in atmosphere. Journal of Loss Prevention in the Process Industries, 56, 262-271, 2018.

76. Ming Zhou*, Kaikai Chen, Yu Tian*, Qunfeng Zeng, et al. Clumping Stability of Vertical Nanofibers on Surfaces. Langimur, 34(38), 11629-11636, 2018. 

75. 曾群锋*，曹倩，等．类金刚石膜超低摩擦行为的研究进展. 中国表面工程, 31(4)：1-19，2018.

74. Qunfeng Zeng, Tong chen.  Superlow friction and oxidation analysis of hydrogenated amorphous silicon films under high temperature. Journal of Non-Crystalline Solids, 493: 73-81, 2018.  

73. Qunfeng Zeng, et al. Understanding the lubrication mechanism between the polyhydroxyl group lubricants and metal surfaces. Journal of Adhesion Science and Technology, 32(17): 1911-1924, 2018. 

72. Qunfeng Zeng, et al. High temperature low friction behaviors of γ-Fe2O3@SiO2 nanocomposite coatings obtained through sol-gel method. Journal of Sol-Gel Science and Technology, 85(3): 558-566, 2018. 

71.Huijuan Ma, Yanhong Gu*, Qunfeng Zeng, et al. Microstructure, Chemical Composition and Local Corrosion Behavior of a Friction Stud Welding Joint. Journal of Materials Engineering and Performance, 27(2): 666-676, 2018.

70. Liguo Qin*; Qunfeng Zeng, et al. Fabricating hierarchical micro and nano structures on implantable Co–Cr–Mo alloy for tissue engineering by one-step laser ablation. Collids and Surfaces B: Bioniterfaces, 161: 628-635, 2018. 

69.Qunfeng Zeng*, et al. Thermally induced superlow friction of DLC films in ambient air. High Temperature Materials and Processes, 1-5, 2018．

 

2017年

 68. Qunfeng Zeng*, Ali Erdemir, Osman Erylimaz. Ultralow friction of ZrO2 ball sliding against DLC films under various environments. Applied Sciences, 7(9): 938, 2017．
67.曾群锋*，等．真空烧结纳米La2O3掺杂MoSi2复合涂层的高温摩擦学性能．真空科学与技术学报，37(5)：499-504，2017． 
66. Qunfeng Zeng*, et al. Numerical investigation on flow pattern of air-oil with different viscosities lubrication. Engineering, 9(1): 1-13, 2017．
65. 曾群锋*，等．大数据时代下摩擦学教学的思考与启示．求知导刊，(3): 122-123, 2017．
64. Qunfeng Zeng*,et al. Superlow friction of high mileage used oil with CuDTC in presence of MoDTC. Industrial Lubrication and Tribology, 69(2): 190-198, 2017．
 
2016年
 63. Dongya Zhang*, Qunfeng Zeng, et al. Study on Tribological Properties of Multi-layer surface texture on Babbitt alloys surface. Applied Surface Science, 390: 540-549, 2016.
62.Qunfeng Zeng*, Guangneng Dong, et al. Green superlubricity of Nitinol 60 alloy against steel in presence of castor oil. Scientific Reports, 6: 29992, 2016．
61.曾群锋*，董光能．工程摩擦学课程的教学改革初探．求知导刊，（7）：129，2016．
60. Qunfeng Zeng, Jinhua Zhang*, Jun Hong, Cheng Liu. A comparative study on simulation and experiment of oil-air lubrication unit for high speed bearing [J]. Industrial Lubrication and Tribology, 68(3): 325-335, 2016.
59.彭润玲，刘鹏，曾群锋*，等．TiNi60合金与钢球和陶瓷球配副的摩擦学性能对比分析．润滑与密封， 41(4)：95-100，2016．
58.彭润玲*，韩少星，曾群锋，等．真空冷冻干燥法制备纳米铜粉的实验研究．真空科学与技术学报，36(2)：217-222，2016．
57. Qunfeng Zeng*, Guangneng Dong, Yanling Yang, Tonghai Wu. Performance deterioration analysis of the used gear oil. Advances in Chemical Engineering and Science, 6: 67-75, 2016.
 
2015年
 56.曾群锋，等．排污泵球阀的低摩擦表面处理分析．2015年摩擦学失效案例，2015年．
55.Y Yang*, Qunfeng Zeng, et al. Effects of Initial Texture on Rolling Texture and Property of Electrodeposited Nickel Plate. Journal of Computational and Theoretical Nanoscience, 12 (9): 2643-2647, 2015.
54. Hongxing Wu, Liguo Qin, Guangneng Dong *, Qunfeng Zeng. Understanding the physical adsorption action mechanism of MoS2 nanoparticles in boundary lubrication with different Polyisobutyleneamine succinimide (PIBS) concentrations. Tribology Letters, 60(2): 1-12, 2015.
53. Qunfeng Zeng*, et al. Superlubricity of the DLC films-related friction system at elevated temperature. RSC Advance, 5(113): 93147-93154, 2015.
52.曾群锋*，等．铸铁及其表面碳化钨涂层的电化学行为．腐蚀科学与防护技术，27(6)：576-580，2015．
51.彭润玲，刘官，曾群锋*，董光能，赵西朦．不同工况参数下Si3N4球表面DLC膜的摩擦学性能研究．，35(8)：955-962，2015．
50. Yang Y*, Chen J, Zeng Qunfeng, et al. Preparation of Nanostructured Materials under Extreme Electrochemical Conditions [J]. Hans Journal of Nanotechnology, 5(3): 57-62, 2015.
49.彭润玲，韩少星，曾群锋*，等．纳米铜润滑油添加剂分散稳定性的研究进展．江西科学，33(3)：391-395，2015．
48.曾群锋*，刘官，彭润玲，董光能，徐飞燕．退火温度对DLC膜稳定性及摩擦学性能的影响分析．，35(5)：601-607，2015．
47.曾群锋*，徐飞燕，刘鹏，彭润玲，董光能．M15甲醇汽油及其燃烧产物对铸铁的腐蚀性研究．石油化工腐蚀与防护，32(2)：1-5，2015．
46.曾群锋*，王涛，董光能．重型汽车中桥减速器的磨损颗粒分析．润滑与密封，40(4)：1-4，2015．
45.曾群锋*，刘成，张进华．高速轴承油气润滑系统的研究及应用现状．润滑与密封，40(3)：103-108，2015．
44.刘成，张进华，闫柯，翟强，曾群锋*．喷嘴结构对高速滚动轴承油气润滑两相流特性的影响．润滑与密封，40(1)：28-31，2015．
43.杨艳玲*，曾群锋，等．电沉积纳米晶材料再结晶行为研究进展．江西科学，33(1)：97-100，2015．
 
2014年
 42.彭润玲，刘官，曾群锋*，董光能，赵西朦．抗磨添加剂对不同服役阶段润滑油摩擦学性能的影响分析．润滑与密封，39(12)：24-28，2014．
41.曾群锋*，等．Si3N4球/DLC膜摩擦副在真空环境下的摩擦学行为研究[J]．，34(11)：1184-1191，2014．
40.曾群锋*，等．类金刚石膜的高温摩擦特性及其热力学分析．材料热处理学报，35(9)：151-155，2014．
39.曾群锋*，等．类金刚石膜高温摩擦学性能的研究进展[J]．，34(10)：1-6，2014．, 201239–43．
38.曾群锋*，杨艳玲，谢仕芳，董光能．纳米稀土润滑油添加剂的研究应用现状．江西科学，32(4)：421-427，2014．
37.唐光海，张俊锋，曾群锋，等．TiNi形状记忆合金低速冲击性能的数值模拟．材料科学与工程学报，32(2)：174-177，2014．
36. Liguo Qin, Qunfeng Zeng, Wenxing Wang, Yali Zhang, Guangneng Dong*. Response of MC3T3-E1 osteoblast cells to the microenvironment produced on Co-Cr-Mo alloy using laser surface texturing. Journal of Materials Science, 49(6): 2662-2671, 2014. 
35. Dongya Zhang, Yinjuan Chen, Qunfeng Zeng, Guangneng Dong*. Electrophoretic deposition of PTFE particles on porous anodic aluminum oxide film and its tribological properties. Applied Surface Science，2014, 290(30): 466–474.
34.Qun-feng Zeng*, Guang-neng Dong. Superlubricity behaviors of Nitinol 60 alloy under oil lubrication. Transactions of Nonferrous Metals Society of China, 24(2): 354-359, 2014.
33.曾群锋*，等．类金刚石膜-磨粒­滑动接触过程的有限元分析[J]．真空科学与技术学报，34(1)2014．
 
2013年
32.曾群锋*，等．类金刚石膜高温摩擦学性能的研究进展．中国科技论文在线发表，2013年．
31.曾群锋*，等．钢基体上类金刚石膜的高温摩擦特性及其氧化产物的热力学分析．中国科技论文在线发表，2013年．
30.Qunfeng Zeng*, Guangneng Dong. Influence of load and sliding speed on super low friction of Nitinol 60 alloy under castor oil lubrication. Tribology Letters,52: 47-55, 2013.ISSN : 1023-8883, IF: 1.743. SCI: 215ZV
29.Qunfeng Zeng*, Fei Yu, Guangneng Dong. Superlubricity behaviors of Si3N4/DLC Films under PAO oil with nano boron nitride additive lubrication. Surface and Interface Analysis, 45(8): 1283-1290, 2013. IF: 1.22. SCI: 178KE
28.Liguo Qin, Ping Lin, Yali Zhang, Guangneng Dong*, Qunfeng Zeng*. Influence of surface wettability on the tribological properties of laser textured Co-Cr-Mo alloy in aqueous bovine serum albumin solution. Applied Surface Science, 268: 79-86, 2013. IF: 2.112, SCI: 095JK
27. Dong-ya Zhang, Peng-bo Zhang, Ping Lin, Guang-neng Dong*, Qun-feng Zeng. Tribological properties of self-lubricating polymer/steel laminated composites. Tribology Transactions, 56: 908–918, 2013.ISSN: 0742-4787, IF: 1.213, SCI: 220VH
26.Dongya Zhang, Ping Lin, Guangneng Dong*, Qunfeng Zeng*. Mechanical and tribological properties of self-lubricating laminated composites with flexible design. Materials and Design, 50: 830-838, 2013. IF: 2.913, SCI: 167EZ
25. V. Sista*, O.Kahvecioglu, G. Kartal, Qunfeng Zeng, J. Kim, O. Eryilmaz, A. Erdemir. Evaluation of electrochemical boriding of Inconel 600. Surface and Coatings Technology, 215: 452-459, 2013.
24. 曾群锋*，等．基于LabVIEW高温摩擦磨损试验机测试系统设计方法．计算机系统应用，22(6)：60-63，2013．
23. 曾群锋*，等．工况参数对类金刚石膜摩擦学性能的影响．真空科学与技术学报，33(4)：377-381，2013．EI: 20132016341659
22. 曾群锋*，等．真空摩擦磨损试验机的真空系统设计．真空科学与技术学报，33(7)：627-631，2013．EI: 20133316623736
 
2012年
21. Qun-feng Zeng*, Xi-meng Zhao, Guang-neng Dong, Hong-xing Wu. Study on the lubrication properties of Nitinol 60 alloy used as high-speed rolling bearing and number simulation of flow pattern of oil-air lubrication. Transactions of Nonferrous Metals Society of China, 22(10): 2431-2438, 2012. IF: 0.917. SCI: 030IU
20. Qunfeng Zeng*, Fei Yu, Guangneng Dong, Junhong Mao. Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment. Applied Surface Science, 259(15): 83-92, 2012. IF: 2.112, SCI: 028QJ
19. T. Fu*, Z. Zhou, Y. Zhou, X. Zhu, Qunfeng Zeng, C. Wang, K. Li, J. Lu*. Mechanical properties of DLC coating sputter deposited on surface nanocrystallized 304 stainless steel. Surface and Coatings Technology, 207: 555-564, 2012. IF: 1.941, SCI: 016EZ

18. 张东亚，林平，董光能*．性能可调的自润滑叠层复合材料的摩擦学行为研究．学报，46(11)：y1-y5，2012．

17. 周益敏，赵程，曾群锋，罗厚杉，付 涛*．304不锈钢纳米晶粒表层液体氮碳共渗后的结构和力学性能. 金属热处理, 2012，37(10)：39–43．

16. 曾群锋*．高温摩擦试验机测试系统．软件著作权：2012R11L110131，2012．
 
2011年
15. Qunfeng Zeng*, Osman Eryilmaz, Ali Erdemir. Analysis of plastic deformation in the DLC film-steel substrate system with the tribological tests. Thin Solid Films, 519(10): 3203–3212, 2011. IF: 1.604, SCI: 745OH

14. 付 涛*，赵程，罗厚杉，曾群锋，张永强，刘聪．低温盐浴氮碳共渗304奥氏体不锈钢的结构与性能．金属热处理， 36(12)：121–124，2011．

 
2008年
13. Qun-feng Zeng, Guang-neng Dong*, You-bai Xie. Influence of sulfidation treatment on the structure and tribological properties of nitrogen-doped diamond like carbon films [J]. Applied Surface Science, 2008, 254(13): 3859–3866. IF: 2.112, SCI: 277FN
12. Qun-feng Zeng, Guang-neng Dong*, You-bai Xie. Structure and tribological properties of amorphous carbon films deposited by electrochemical method on GCr15 steel substrate [J]. Applied Surface Science, 2008, 254(8): 2425–2430. IF: 2.112, SCI: 293OL
 
2007年
11. 曾群锋，董光能*，徐均琪，杭灵侠．高速钢表面镀覆DLC膜的结构及其摩擦特性研究[J]．润滑与密封，2007，32(10)：25–28
10. 张宇军，董光能*，毛军红，曾群锋，谢友柏．类金刚石膜形态的分子动力学模拟研究[J]．真空科学与技术学报，2007，27(6)：455–459．
9.张宇军，董光能*，毛军红，曾群锋，谢友柏．类金刚石膜生长特性的分子动力学模拟[J]．润滑与密封，2007，32(10)：4–7．
8.李纪云，曾群锋等．均匀设计法在聚醚醚酮复合材料摩擦学特性试验中的应用研究[J]．润滑与密封，2007，32(7)：13–15．
7. Peng Xu-Dong*, Li Ji-Yun, Zeng Qunfeng. Study on the friction and wear behavior of peek composites filled with nanometer compounds and PTFE [J]. Proceedings of International Conference on Integration and Commercialization of Micro and Nanosystems, 2007, Sanya. EI: 20073410774748
 
2006年
6.曾群锋等．聚合物基复合材料导热性能的预测模型[J]．润滑与密封，2006，(4)：70–75．
5. 曾群锋等．纳米氧化硅粒子和聚四氟乙烯填充聚醚醚酮复合材料的摩擦学特性研究[J]．哈尔滨工业大学学报，2006，38(增刊)：230–233．
 
2005年
4.彭旭东*，曾群锋．聚合物基复合材料的导热性能预测研究[J]．第二届全国生物复合材料学术研讨会．2005年，天津．
3.彭旭东*，曾群锋．聚醚醚酮基复合材料的热性质和物理性质预测及摩擦销三维温度场的数值模拟．摩擦学学报，2005，25(4)：353-357．
2.彭旭东*，曾群锋，等．纳米粒子及PTFE填充PEEK复合材料摩擦特性的载荷和时间依赖性．润滑与密封，2005，(4)：56-58．
 
2004年
1.彭旭东*，曾群锋，等．无机纳米微粒及聚四氟乙烯填充聚醚醚酮复合材料的摩擦学性能．摩擦学学报，2004，24(3)：240-243．

 

杂志审稿

 

«  ACS Applied Materials & Interfaces

«  ACS Nano

«  Advances in Mechanical Engineering

«  African Journal of Agricultural Research

«  Chemical Engineering Communications

«  Cogent Engineering

«  Friction

«  Indian Journal of Engineering & Materials Sciences

«  Industrial & Engineering Chemistry Research

«  Industrial Lubrication and Tribology

«  Journal of Alloys and Compounds

«  Journal of Applied Mathematics and Computing

«  Journal of Applied Mechanical Engineering

«  Journal of the Brazilian Society of Mechanical Sciences and Engineering

«  Journal of Materials Engineering and Performance

«  Journal of Testing and Evaluation

«  Lubricants

«  Mathematical Problems in Engineering

«  Materials and Design

«  Part J: Journal of Engineering Tribology

«  Particulate Science and Technology

«  RSC Advance

«  RSC: Proceedings A

«  Surface and Coatings Technology

«  Surface and Interface Analysis

«  Surface Review and Letters

«  Tribology Transactions

«  学报

«  中国表面工程