近五年代表性论文：

[1]      Liao Xinzhong, Liu Yuxuan, Ren Jiahang, Guan Liuping, Sang Xuehao, Wang Bowen, Zhang Hang, Wang Qiuwang, Ma Ting*. Investigation of a double-PCM-based thermoelectric energy-harvesting device using temperature fluctuations in an ambient environment. Energy, 2020, 202:117724.

[2]      Xu Zirui, Li Xinyi, Zhu Ziliang, Wang Qiuwang, Chen Yitung, Ma Ting*. Experimental study on the heat transfer performance of a gallium heat sink. Energy Conversion and Management, 2020, 213:112853.

[3]      Ma Ting, Zhang Pan, Shi Haoning, Chen Yitung, Wang Qiuwang*. Prediction of flow maldistribution in printed circuit heat exchanger. International Journal of Heat and Mass Transfer, 2020, 152:119560.

[4]      Chu Wenxiao, Li Xionghui, Chen Yitung, Wang Qiuwang, Ma Ting*. Experimental study on small scale printed circuit heat exchanger with zigzag channels. Heat Transfer Engineering, DOI: 10.1080/01457632.2020.1735779, 2020.

[5]      Xu Zirui, Li Xinyi, Niu Cong, Wang Qiuwang, Ma Ting*. Enhancement of gallium phase-change heat transfer by copper foam and ultrasonic vibration. Journal of Enhanced Heat Transfer, 2020, 27(1):71-84.

[6]      Wang Luxin^#, Lu Xing^#, Yu Xingfei, Wang Qiuwang, Zhao Dongliang, Ren Wei, Ma Ting*. Effect of operating temperature on interface diffusion and power generation of bismuth telluride thermoelectric modules. Heat Transfer Research, 2020, 51: 253-262.

[7]      Lu Xing, Yu Xingfei, Wang Qiuwang, Chen Yitung, Ma Ting*. Numerical study on nonuniform segmented enhancement method for thermoelectric power generator. Numerical Heat Transfer Part A-Applications, 2019, 76(8): 605-627.

[8]      Borjigin Saranmanduh, Zhang Shuxiong, Zeng Min, Wang Qiuwang, Ma Ting*. Coupling epsilon-NTU method for thermal design of heat exchanger in cabinet cooling system. Applied Thermal Engineering, 159: UNSP 113972, 2019

[9]      Deng Tianrui, Li Xionghui, Wang Qiuwang, Ma Ting*. Dynamic modelling and transient characteristics of supercritical CO2 recompression Brayton cycle. Energy, 2019, 180: 292-302.

[10]   Ma Ting, Qu Zuoming, Yu Xingfei, Lu Xing, Chen Yitung, Wang Qiuwang*. Numerical study and optimization of thermoelectric-hydraulic performance of a novel thermoelectric generator integrated recuperator. Energy, 2019, 174: 1176-1187.

[11]   Ma Ting, Qu Zuoming, Yu Xingfei, Lu Xing, Wang Qiuwang*. A review on thermoelectric-hydraulic performance and heat transfer enhancement technologies of thermoelectric power generator system. Thermal Science, 22(5): 1885-1903, 2018.

[12]   Yu Xingfei, Lu Xing, Wang Qiuwang, Chen Yitung, Ma Ting*. Parametric study of thermoelectric power generators under large temperature difference conditions. Applied Thermal Engineering, 144: 647-657, 2018.

[13]   Lu Xing, Yu Xingfei, Qu Zuoming, Wang Qiuwang, Ma Ting*. Experimental investigation on thermoelectric generator with non-uniform hot-side heat exchanger for waste heat recovery. Energy Conversion and Management, 150: 403-414, 2017.

[14]   Ma Ting, Lu Xing, Pandit Jaideep, Ekkad Srinath V., Huxtable Scott T., Deshpande Samruddhi, Wang Qiu-Wang*. Numerical study on thermoelectric-hydraulic performance of a thermoelectric power generator with a plate-fin heat exchanger with longitudinal vortex generators. Applied Energy, 185: 1343-1354, 2017.

[15]   Ma Ting, Chu Wen-xiao, Xu Xiang-yang, Chen Yi-tung, Wang Qiu-wang*. An experimental study on heat transfer between supercritical carbon dioxide and water near the pseudo-critical temperature in a double pipe heat exchanger. International Journal of Heat and Mass Transfer, 93: 379-387, 2016.

[16]   Pasquier U., Chu W.X., Zeng M., Chen Y.T., Wang Q.W., Ma T.*. CFD simulation and optimization of fluid flow distribution inside printed circuit heat exchanger headers. Numerical Heat Transfer Part A-Applications, 69(7): 710-726, 2016.

[17]   Ma Ting, Li Lei, Xu Xiang-Yang, Chen Yi-Tung, Wang Qiu-Wang^*. Study on local thermal-hydraulic performance and optimization of zigzag-type printed circuit heat exchanger at high temperature. Energy Conversion and Management, 104: 55-66, 2015.

[18]   Ma Ting, Xin Fei, Li Lei, Xu Xiang-yang, Chen Yi-tung, Wang Qiu-wang*. Effect of fin-endwall fillet on thermal hydraulic performance of airfoil printed circuit heat exchanger. Applied Thermal Engineering, 89: 1087-1095, 2015.

[19]   Ma Ting*, Pandit Jaideep, Ekkad Srinath V., Huxtable Scott T., Wang Qiuwang. Simulation of thermoelectric-hydraulic performance of a thermoelectric power generator with longitudinal vortex generators. Energy, 84: 695-703, 2015.

[20]   Ma Ting, Yan Min, Zeng Min, Yuan Jin-liang, Chen Qiu-yang, Sunden Bengt, Wang Qiu-wang*. Parameter study of transient carbon deposition effect on the performance of a planar solid oxide fuel cell. Applied Energy, 152: 217-228, 2015.

[21]   Ma Ting, Zhang Jie, Borjigin Saranmanduh, Chen Yi-Tung, Wang Qiu-Wang, Zeng Min*. Numerical study on small-scale longitudinal heat conduction in cross-wavy primary surface heat exchanger. Applied Thermal Engineering, 76: 272-282, 2015.

[22]   Xu X.Y., Wang Q.W., Li L., Ekkad S.V., Ma T.*. Thermal-hydraulic performance of different discontinuous fins used in a printed circuit heat exchanger for supercritical CO2. Numerical Heat Transfer Part A-Applications, 68(10): 1067-1086, 2015.

[23]   Xu X.Y., Wang Q.W., Li L., Chen Y.T., Ma T.*. Study on thermal resistance distribution and local heat transfer enhancement method for SCO2-water heat exchange process near pseudo-critical temperature. International Journal of Heat and Mass Transfer, 82: 179-188, 2015.

近五年代表性专利：

[1]      马挺，关柳萍，任佳航，刘宇轩，廖新忠，桑学昊，王博文，王秋旺. 一种温度控制式复合相变材料温差发电系统. 中国发明专利, 专利号: ZL 201910489573.8（授权日期：2020-7-14）

[2]      马挺，萨仁满都呼，王秋旺，曾敏，常宏亮，张术雄. 一种气气换热系统. 中国发明专利, 专利号: ZL 201910489572.3（授权日期：2020-7-14）

[3]      马挺，俞兴飞，李娜，王秋旺. 一种模块化喷雾冷却器. 中国发明专利, 专利号: ZL 201910040978.3 （授权日期：2020-7-28）

[4]      王秋旺，李雄辉，马挺，曾敏，褚雯霄. 一种螺旋推流通道板式换热器. 中国发明专利, 专利号: ZL 201711209065.7（授权日期：2019-8-23）

[5]      王秋旺，萨仁满都呼，马挺，曾敏. 一种换热器系统热力设计方法. 中国发明专利, 专利号: ZL 201710047745.7（授权日期：2019-8-23）

[6]      王秋旺，石昊宁，马挺. 一种多通道板式换热器进出口设计方法. 中国发明专利, 专利号: ZL 201710839087.5 （授权日期：2019-04-12）

[7]      王秋旺，辛菲，马挺，李雄辉，邓天瑞. 喷淋蚀刻系统. 中国发明专利, 专利号: ZL 201711153828.0 （授权日期：2019-04-02）

[8]      马挺, 屈佐明, 芦星, 王秋旺. 一种板翅式热发电换热器. 中国发明专利, 专利号: ZL 201610986596.6 （授权日期：2019-3-1）

[9]      王秋旺，张攀，马挺. 一种气气高温换热器. 中国发明专利, 申请号: ZL 201710615447.3 （授权日期：2018-12-14）

[10]    王秋旺, 褚雯霄, 马挺, 曾敏. 一种非均匀分布肋片的高温高压板式换热器. 中国发明专利, 专利号: ZL 201510941222.8. （授权日期：2017-10-20）