Basic Information

Contact

phdapple(at)mail(.)xjtu(.)edu(.)cn

创新港 力行楼 2-5021

站点计数器

Research Fields

杨志勃（Zhi-Bo Yang），基金委优青，陕西省杰青、青年科技新星、青年托举人才、优博。即左图所示，一年四季同一件（机械学院特色）蓝色冲锋衣内衬（特价）头发比胡子短的男性大学教师，1987年生，中国共产党党员（党费主动、按时交纳，爱党爱国爱社会），工学博士（说明曾单身多年），教授，博导，机械工程学会高级会员，振动工程学会动态信号分析专委会常务委员、故障诊断分会青年理事，入选“没有突出贡献中青年专家”，汤森路透机械工程领域年度引用后500名专家（年年入选）。

  • 2005年09月-2009年07月，华中科技大学，工学学士
  • 2009年09月-2013年12月，，工学博士，导师：陈雪峰 教授
  • 2013年12月-2016年12月，，博士后讲师，合作导师：陈雪峰 教授
  • 2015年08月-2016年08月，波兰科学院，    Szewalski 流体机械研究所，博士后，合作导师：W. Ostachowicz教授/院士
  • 2015年08月-2016年08月，波兰科学院，    Szewalski 流体机械研究所，副研究员
  • 2016年12月-2018年06月，， 副教授
  • 2018年06月-至今，            ， 教授
  • 以下为“四唯”内容，请批判、审慎地阅读、看待：在IEEE TII/TIE/TIM/UFFFC，MSSP、JSV、SMS、CJA、Engineering等期刊发表学术论文150余篇，Sci收录140余篇（一作及通讯80余篇），Ei收录100余篇，授权波兰发明专利1项，授权国家发明专利70余项，申请公开发明专利50余项，出版本科生教材1本，学术专著1本。
  • 2015年，教育部技术发明一等奖，第3完成人。
  • 2018年，国家技术发明二等奖，第5完成人。
  • 2019年，陕西省高等学校科学技术奖一等奖，第1完成人。
  • 2020年，陕西省技术发明一等奖，第5完成人。
  • 2021年，可再生能源学会二等奖，第4完成人。
  • 2023年，陕西省高等学校科学技术奖一等奖，第1完成人。
  • 2024年，中国产学研合作创新与促进奖，产学研合作创新成果奖一等奖，第4完成人。
  • 钱多、活好：主持基金委重大研究计划集成项目1项（在研）、优青项目1项（在研）、基金委重点专项项目1项（在研）、国家重大专项课题1项（优秀）、国家重点研发计划课题1项（优秀）、国家自然科学基金面上项目1项（优秀），陕西省杰青项目1项（优秀），青年项目1项（优秀）。
  • 不挑食、不偏食系列：主要研究领域包括机械结构健康监测，机械非接触测量与监测诊断，故障诊断，损伤检测，有限元方法，风力发电机状态监测，SCADA系统状态监测与预测。目前担任30余个Sci期刊的审稿人，Materials编委（是想当不开源期刊的编委，没人要哦；MDPI是个好出版社，MDPI是个好出版社，MDPI是个好出版社），机械强度青年编委，多个（int x；多=x && x < 3）Sci期刊客座编辑，机械工程学会高级会员，振动工程学会故障诊断分会青年理事，振动工程学会动态信号分析专委会委员，Member of IEEE Instrumentation and Measurement Society ，Ultrasonics, Ferroelectrics, and Frequency Control Society ，IEEE Council on RFID，IEEE Council on Superconductivity，IEEE Nanotechnology Council，IEEE Sensors Council等。曾任国际计算力学大会分会主席及多个期刊的客座编辑等。
  • 然而他们并没有请我吃饭：指导及联合指导博士/硕士3人获得研究生国家奖学金，2人次获得优秀硕士论文。
  • 上课令我快乐：担任本科生专业核心课程《工程有限元与数值计算》（44学时）、《机械设计基础》（72学时及56学时）及研究生留学生《有限元理论与应用（英文）》（40学时）课程。
  • 不知为何，总是怀念你们师兄还没毕业的日子：每年招收硕博连读3名，工程硕士1名，博士研究生2名（特别欢迎有FPGA基础或微波测量基础的同学报考）。
  
  1. Luo, K., Liu, Y., Liang, W., Chen, L., & Yang, Z. (2024). Rapid damage reconstruction imaging of composite plates using non-contact air-coupled Lamb waves. NDT & E International, 103047.
  2. Zhuang, L., Luo, K., & Yang, Z. (2024). A multimodal gated recurrent unit neural network model for damage assessment in CFRP composites based on Lamb waves and minimal sensing. IEEE Transactions on Instrumentation and Measurement.
  3. Wu, D., Yang, Z., Ruan, Y., & Chen, X. (2024). Blind single-channel lamb wave mode separation using independent component analysis on time-frequency signal representation. Applied Acoustics, 216, 109810.
  4. Yang, Z. B., Wang, Z. K., Li, H. Q., Tian, S. H., & Chen, X. F. (2023). Stable subspace dimension reduced MUSIC for blade tip timing. Journal of Sound and Vibration, 545, 117438.
  5. Lang, Y., Yang, Z., & Chen, X. (2023). Dispersive instantaneous frequency imaging. Journal of Sound and Vibration, 555, 117711.
  6. Lang, Y., Yang, Z., Kong, D., Zhang, W., & Chen, X. (2023). Forward-propagation-free focusing MUSIC algorithm for Lamb waves. Structural Health Monitoring, 14759217231159868.
  7. Wang, Z., Stoica, P., Zachariah, D., Babu, P., & Yang, Z. (2023). Min-Max Probe Placement and Extended Relaxation Estimation Method for Processing Blade Tip Timing Signals. IEEE Transactions on Instrumentation and Measurement.
  8. Yang, Z., Cao, J., Wu, S., & Chen, X. (2023). High-resolution sampling aliasing frequency distribution. Mechanical Systems and Signal Processing, 205, 110869.
  9. Li, W., Tian, S., Yang, Z., Zhang, X., & Chen, X. (2023). Multi-spectrum fusion for single-probe blade tip timing. Mechanical Systems and Signal Processing, 204, 110798.
  10. Cao, J., Yang, Z., Tian, S., Teng, G., & Chen, X. (2023). Active aliasing technique and risk versus error mechanism in blade tip timing. Mechanical Systems and Signal Processing, 191, 110150.
  11. Wang, Z. K., Yang, Z. B., Wu, S. M., Tian, S. H., & Chen, X. F. (2023). Block-MUSIC in blade tip timing: Performance study of block snapshot matrix. Mechanical Systems and Signal Processing, 198, 110374.
  12. Cao, J. H., Yang, Z. B., Teng, G. R., & Chen, X. F. (2023). Coprime and nested samplings-based spectrum reconstruction in blade tip timing. Mechanical Systems and Signal Processing, 186, 109887.
  13. Li, W., Tian, S., Yang, Z., Teng, G., & Chen, X. (2023). Parametric Bayesian model for rotating blade frequency tracking with single probe blade tip timing. Mechanical Systems and Signal Processing, 200, 110627.
  14. Cao, J., Yang, Z., Sun, R., & Chen, X. (2023). Delay sampling theorem: A criterion for the recovery of multitone signal. Mechanical Systems and Signal Processing, 200, 110523.
  15. Cao, J., Yang, Z., Tian, S., & Chen, X. (2023). Time delay-based spectrum reconstruction for nonuniform and sub-Nyquist sampling in blade tip timing. Mechanical Systems and Signal Processing, 200, 110552.
  16. Cao, J., Yang, Z., Chen, X., & Yan, R. (2023). From Pseudo to Real: Generalized Subspace Method for Power Spectrum Reconstruction. IEEE Transactions on Industrial Electronics.
  17. Cao, J., Yang, Z., Sun, R., Teng, G., & Chen, X. (2023). OPR-free single probe blade tip timing for monitoring rotating blade. International Journal of Mechanical Sciences, 247, 108174.
  18. Li, W., Yang, Z., Tian, S., Zhao, Y., & Chen, X. (2023). Single-probe blade tip timing based on sparse Bayesian learning. Measurement Science and Technology, 34(5), 055001.
  19. Jiahui, C. A. O., Zhibo, Y. A. N. G., Guangrong, T. E. N. G., Shaohua, T. I. A. N., Guoyong, Y. E., & Xuefeng, C. H. E. N. (2023). Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement. Chinese Journal of Aeronautics, 36(3), 220-240.
  20. Jin R., Yang, L., Yang, Z., Tian, S., Teng, G., & Chen, X. (2023). Improved minimum variance distortionless response spectrum method for efficient and robust non-uniform undersampled frequency identification in blade tip timing. Frontiers of Mechanical Engineering, 18(4), 1-17.
  21. Jin R., Yang, L., Yang, Z., Sun, Y., Mao, Z., Yan, R., & Chen, X. (2023). The connection between digital-twin model and physical space for rotating blade: an atomic norm-based BTT undersampled signal reconstruction method. Structural and Multidisciplinary Optimization, 66(1), 27.
  22. Ling, F., Chen, H., Lang, Y., Yang, Z., Xu, K., & Ta, D. (2023). Lamb wave tomography for defect localization using wideband dispersion reversal method. Measurement, 216, 112965.
  23. Li, H., Wu, S., Yang, Z., Yan, R., & Chen, X. (2023). Measurement Methodology: Blade Tip Timing: A Non-Contact Blade Vibration Measurement Method. IEEE Instrumentation & Measurement Magazine, 26(9), 12-20.
  24. Yang, Z. B., Zhu, M. F., Lang, Y. F., & Chen, X. F. (2022). FRF-based lamb wave phased array. Mechanical Systems and Signal Processing, 166, 108462.
  25. Cao, J. H., Yang, Z. B., Li, H. Q., Teng, G. R., Tian, S. H., Li, W. B., & Chen, X. F. (2022). Rotating blade frequency identification by single-probe blade tip timing. Mechanical Systems and Signal Processing, 172, 108961.
  26. Lang, Y., Yang, Z., Yang, L., & Chen, X. (2022). Lamb wave frequency diverse array. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 69(8), 2526-2539.
  27. Wang, Z., Yang, Z., Teng, G., Yan, R., Tian, S., Li, H., ... & Chen, X. (2022). Amplitude-Identifiable MUSIC (Aid-MUSIC) for Asynchronous Frequency in Blade Tip Timing. IEEE Transactions on Industrial Informatics, 19(4), 5732-5742.
  28. Cao, J., Yang, Z., Tian, S., Li, H., R., Yan, R., & Chen, X. (2022). Biprobes blade tip timing method for frequency identification based on active aliasing time-delay estimation and dealiasing. IEEE Transactions on Industrial Electronics, 70(2), 1939-1948.
  29. Li, H., Tian, S., & Yang, Z. (2022). A Novel Blade Vibration Monitoring Experimental System Based on Blade Tip Sensing. Materials 2022, 15, 6987.
  30. Yang, D., Wei, V., Yang, Z., & Chen, X. (2022). A UMAP-based clustering method for multi-scale damage analysis of laminates. Applied Mathematical Modelling, 111, 78-93.
  31. Wang, Z. K., Yang, Z. B., Li, H. Q., Cao, J. H., Tian, S. H., & Chen, X. F. (2022). Automatic tracking of natural frequency in the time–frequency domain for blade tip timing. Journal of Sound and Vibration, 516, 116522.
  32. Cao, J., Tian, S., Yang, Z., Teng, G., Li, H., ... & Chen, X. (2022). Blade tip timing signal filtering method based on sampling aliasing frequency map. IEEE Transactions on Instrumentation and Measurement, 71, 1-12.
  33. Lang, Y. F., Tian, S. H., Yang, Z. B., Zhang, W., Kong, D. T., Xu, K. L., & Chen, X. F. (2021). Focusing phase imaging for Lamb wave phased array. Smart Materials and Structures, 31(2), 025001.
  34. Wang, Z. K., Yang, Z. B., Wu, S. M., Li, H. Q., Tian, S. H., & Chen, X. F. (2022). Optimization and assessment of blade tip timing probe layout with concrete autoencoder and reconstruction error. Applied Soft Computing, 119, 108590.
  35. Ao, C., Qiao, B., Liu, M., Fu, S., Yang, Z., & Chen, X. (2022). Dynamic strain reconstruction of rotating blades based on tip timing and response transmissibility. Journal of Engineering for Gas Turbines and Power, 144(6), 061011.
  36. Zhang, X., Ma, R., Li, M., Li, X., Yang, Z., Yan, R., & Chen, X. (2022). Feature enhancement based on regular sparse model for planetary gearbox fault diagnosis. IEEE Transactions on Instrumentation and Measurement, 71, 1-16.
  37. Yang, Z. B., Zhu, M. F., Lang, Y. F., & Chen, X. F. (2022). Estimation of Lamb wave propagation by means of Fourier spectral frequency response function. Nondestructive Testing and Evaluation, 37(2), 160-183.
  38. Yang, D., Yang, Z., Wang, C., Chen, X., & Li, M. (2022). Micromechanical modeling of cyclic elasto-viscoplastic behavior of unidirectional metal matrix composites under elevated temperature. Mechanics of Advanced Materials and Structures, 29(22), 3285-3300.
  39. Sun, R. B., Du, F. P., Yang, L. H., Ma, M., Yang, Z. B., & Chen, X. F. (2022). Feature-guided regularization parameter selection in sparse de-noising for fault diagnosis. Mechanical Systems and Signal Processing, 179, 109373.
  40. Li, H., Yang, Z., Wu, S., Wang, Z., Tian, S., Yan, R., & Chen, X. (2021). Adaptive iterative approach for efficient signal processing of blade tip timing. IEEE Transactions on Instrumentation and Measurement, 70, 1-13.
  41. Wu, S., Wang, Z., Li, H., Yang, Z., Tian, S., Yan, R., ... & Chen, X. (2021). Blade crack detection using blade tip timing. IEEE Transactions on Instrumentation and Measurement, 70, 1-13.
  42. Zhang, X., Yu, X., Liu, Y., Yang, Z., Gong, B., & Chen, X. (2021). Adaptive neighborhood selection based on locally linear embedding for the degradation index construction of traction motor bearing. Measurement Science and Technology, 32(11), 115123.
  43. Xu, J., Qiao, B., Liu, M., Yang, Z., & Chen, X. (2021). Crack propagation monitoring of rotor blades using synchroextracting transform. Journal of Sound and Vibration, 509, 116253.
  44. Sun, R. B., Du, F. P., Yang, Z. B., Chen, X. F., & Gryllias, K. (2021). Cyclostationary analysis of irregular statistical cyclicity and extraction of rotating speed for bearing diagnostics with speed fluctuations. IEEE Transactions on Instrumentation and Measurement, 70, 1-11.
  45. Wang, Z., Yang, Z., Li, H., Wu, S., Tian, S., & Chen, X. (2021). Subspace dimension reduction for faster multiple signal classification in blade tip timing. IEEE Transactions on Instrumentation and Measurement, 70, 1-10.
  46. Xu, C., Yang, Z., Zuo, H., & Deng, M. (2021). Minimum variance Lamb wave imaging based on weighted sparse decomposition coefficients in quasi-isotropic composite laminates. Composite Structures, 275, 114432.
  47. Yang, D., Sun, Y., Yang, Z., Chen, X., & Wang, C. (2021). Multiscale modeling of unidirectional composites with interfacial debonding using molecular dynamics and micromechanics. Composites Part B: Engineering, 219, 108893.
  48. Wang, Z. K., Yang, Z. B., Li, H. Q., Wu, S. M., Tian, S. H., & Chen, X. F. (2021). Robust sparse representation model for blade tip timing. Journal of Sound and Vibration, 500, 116028.
  49. Cao, J., Yang, Z., Li, H., Wang, Z., Tian, S., Yang, L., & Chen, X. (2021). Single-probe blade tip timing: A novel method for anomaly identification based on frequency shift. IEEE Transactions on Instrumentation and Measurement, 70, 1-16.
  50. Zuo, H., Chen, Y., Jia, F., & Yang, Z. (2021). Unified wavelet finite element formulation for static and vibration analysis of laminated composite shells. Composite Structures, 272, 114207.
  51. Luo, W., Qiao, B., Shen, Z., Yang, Z., Cao, H., & Chen, X. (2021). Investigation on the influence of spalling defects on the dynamic performance of planetary gear sets with sliding friction. Tribology International, 154, 106639.
  52. Xu, C., Yang, Z., Qiao, B., & Chen, X. (2020). A parameter estimation based sparse representation approach for mode separation and dispersion compensation of Lamb waves in isotropic plate. Smart Materials and Structures, 29(3), 035020.
  53. Wang, Z., Yang, Z., Wu, S., Li, H., Tian, S., & Chen, X. (2020). An improved multiple signal classification for nonuniform sampling in blade tip timing. IEEE Transactions on Instrumentation and Measurement, 69(10), 7941-7952.
  54. Wang, Z., Yang, Z., Wu, S., Li, H., Tian, S., Zhang, X., ... & Chen, X. (2020). An OPR-free blade tip timing method for rotating blade condition monitoring. IEEE Transactions on Instrumentation and Measurement, 70, 1-11.
  55. Sun, R. B., Yang, Z. B., Gryllias, K., & Chen, X. F. (2020). Cyclostationary modeling for local fault diagnosis of planetary gear vibration signals. Journal of Sound and Vibration, 471, 115175.
  56. Liu, J., Qiao, B., He, W., Yang, Z., & Chen, X. (2020). Impact force identification via sparse regularization with generalized minimax-concave penalty. Journal of Sound and Vibration, 484, 115530.
  57. Luo, W., Qiao, B., Shen, Z., Yang, Z., Cao, H., & Chen, X. (2020). Influence of sliding friction on the dynamic characteristics of a planetary gear set with the improved time-varying mesh stiffness. Journal of Mechanical Design, 142(7), 073302.
  58. Luo, W., Qiao, B., Shen, Z., Yang, Z., & Chen, X. (2020). Time-varying mesh stiffness calculation of a planetary gear set with the spalling defect under sliding friction. Meccanica, 55, 245-260.
  59. Yang, Z. B., Zhang, J. P., Zhao, Z. B., Zhai, Z., & Chen, X. F. (2020). Interpreting network knowledge with attention mechanism for bearing fault diagnosis. Applied Soft Computing, 97, 106829.
  60. Yang, Z. B., Li, H. Q., Qiao, B. J., & Chen, X. F. (2020). Wavelet Element Modelling for Inviscid Fluid–Solid Coupling Problem based on Partitioned Approach. Materials, 13(17), 3699.
  61. Sun, R. B., Yang, Z. B., Yang, L. D., Qiao, B. J., Chen, X. F., & Gryllias, K. (2020). Planetary gearbox spectral modeling based on the hybrid method of dynamics and LSTM. Mechanical Systems and Signal Processing, 138, 106611.
  62. Xu, C., Yang, Z., & Deng, M. (2020). Weighted structured sparse reconstruction-based Lamb wave imaging exploiting multipath edge reflections in an isotropic plate. Sensors, 20(12), 3502.